Bucan Cartridge Heaters Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Wasserkocher Bucan Cartridge Heaters herunter. Bucan Cartridge Heaters User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
3300 PITFIELD BOULEVARD, ST-LAURENT, QC, H4S 1K6
TEL: 514 335 9665 / FAX: 514 335 9804
CH-INS11
Cartridge Heaters
All Bucan cartridge heaters incorporate a conservative design approach, use premium quality raw materials and are made by a
highly skilled staff. You can expect top performance and by following these instructions you will benefit from many years of
trouble free service.
Selection & installation:
1. Only qualified personnel are to install industrial electric heating equipment and must meet all national and local codes.
2. Ensure the power connections match the voltage, phase and wattage data on the nameplate.
3. Cartridge heaters should have a tight fit in the receptacle hole. Drilling and reaming to the next standard size and using a larger
cartridge could solve the problem of loose or worn-out holes.
4. Lead wires should be kept away from abrasion and should not be exposed to temperatures above 840°F.
5. Stocked cartridge heaters, which have been exposed to air and moisture for a long period of time, should be energized at a low
voltage prior to usage, in order to eliminate possible moisture contamination. It is always preferable to stock cartridge heaters in
sealed bags.
6. Cartridge heaters should be immersed completely inside the receptacle hole. Proper mounting attachments can prevent their
edging out by vibration. If it is necessary to have an exposed section, that part should be unheated.
7. Receptacle holes should be properly cleaned prior to the installation of a cartridge heater.
8. When designing molds, it is recommended to make the receptacle cavities such that they will accommodate cartridge heaters
completely and all-the-way-through. This will later facilitate the removal of the heaters.
9. Watt densities should be kept within the safe range. This can be done by using either larger cartridges or as many as it is
reasonably possible.
10. To prevent short cycling, the wattage of a cartridge heater should be close to the required application wattage.
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - Cartridge Heaters

3300 PITFIELD BOULEVARD, ST-LAURENT, QC, H4S 1K6 TEL: 514 335 9665 / FAX: 514 335 9804 CH-INS11 Cartridge Heaters All Bucan cartridge h

Kommentare zu diesen Handbüchern

Keine Kommentare